PRODUCT CENTER
FHS-1200 鋁箔多功能雙色龍門復合機
詳細描述
● 多功能干濕式復合機適用于鍍鋁膜、鐳射膜、鋁箔和紙復合，可同時進行濕式復合、紙背面涂布及復合紙或轉移膜剝離后表面上色，同時兼剝離卷取，然后干燥、冷卻并且收卷等功能。
● 多功能復合機由紙放卷部、紙牽引部、第一膜放卷部、濕式復合部、背面涂布部、組合式烘道、第一冷卻剝離部、第一膜收卷部、上色涂布部、印刷部、紙收卷部、電氣控制部共十二部分組成。
● 機組濕式涂布頭采用三輥上膠形式，背涂、及上色涂布頭機構采用本公司最新開發的新型涂布頭，設計獨特，三維均可方便調節及附有減震機構，運行平穩精度高。
● 收卷采用氣動跟蹤式收卷方式；自動錐度張力控制，確保收卷質量。
● 烘箱系統采用熱風循環組合式烘道，烘干徹底、高效率低功耗。
參數規格
技術參數 Technical parameter | 技術參數 Technical parameter |
放卷最大有效寬度 Maximum effective width of unwinding | 1300mm |
適用基材 Applicable substrate | 襯紙28-120g/m2 、鋁箔0.0045-0.010mm、PET、OPP鐳射膜0.012-0.025mm等 Backing paper 28-120g / m2, aluminum foil 0.0045-0.010mm, pet, OPP laser film 0.012-0.025mm, etc |
電子軸雙色套印，同步電機驅動，配套相應控制器控制 Electronic axis two-color overprint, synchronous motor drive, matching the corresponding controller control | 雙色套印精度≤±0.1mm Two color overprint accuracy ≤± 0.1mm |
基材寬度 Substrate width | 最大1250mm（10＊114mm） Maximum 1250mm (10 * 114mm) |
紙放卷直徑 Paper unwinding diameter | ≥φ1200 mm(max) ≥φ1200 mm(max) |
鋁箔、膜收放卷 Rolling and unwinding of aluminum foil and film | φ600mm(max) φ600mm(max) |
單工位氣動夾緊，自動上料，獨立光電糾偏 Single station pneumatic clamping, automatic feeding, independent photoelectric correction | / |
鋁箔交叉式放卷、獨立可調整放卷張力與光電自動糾偏 Aluminum foil cross unwinding, independent adjustable unwinding tension and photoelectric automatic deviation correction | 糾偏精度≤±0.15mm Deviation correction accuracy ≤± 0.15mm |
成品收卷直徑具有氣動卸料機構、自動下卷 The finished product winding diameter has pneumatic unloading mechanism and automatic unwinding | φ1320 mm(max) φ1320 mm(max) |
收卷前鋁箔紙經分切工位，分切糾偏精度≤±0.15mm，分切后兩卷同步收卷 Before rewinding, the aluminum foil passes through the slitting station, and the slitting correction accuracy is less than ± 0.15mm. After slitting, the two rolls are rewound synchronously | / |
收、放卷紙管內徑 Inner diameter of take-up and take-off tube | 3英寸 3 inches |
粘合劑 Adhesive | 水溶性 Water solubility |
色層涂液 Layer coating solution | 溶劑性/水溶性 Solvent / water soluble |